Thank you for purchasing your Niddy Noddy from Ed Pretty-Wood Artist!
Your Niddy Noddy is made from Eastern maple for durability. The assembly hardware allows you to switch between sizes and also easily remove your skein. The design allows for easy storage and transportation when the niddy noddy is disassembled.
Included: cross heads (2), set of different lengths of main struts (3) and thumb screws (2).
Assembly
- The “circumference” of each length of main strut are: Long – 76” (193 cm), Medium – 60” (152 cm), Short – 40” (101 cm)
- After choosing the length of main strut required, insert the thumb screws through the cross heads then thread each one into the barrel nuts in the main strut. Tighten each one snugly, so that each crosshead can still be moved for adjustment.
- Adjust the cross heads so that they are 90° to each other. Fully tighten the thumb screws when this is complete.
Removing your skein and disassembly
- To remove your skein, simply remove the thumb screw on one end and slide the cross head off the end of the main strut, releasing the tension on the yarn.
- Reassemble or store your niddy noddy as required.
- If you are disassembling your niddy noddy for storage or transportation, be certain those pesky little thumb screws are threaded into the barrel nuts in one of the main struts to prevent loss. 😊
Wound lengths
- Large – 76”
- Medium – 58”
- Small – 42”
